MAXSEAL FOUNDATION is a construction grade cement based product which, together with special additives and selected aggregates gives it waterproofing characteristics, whether the foundations are in concrete or masonry. It gives great protection to foundation concrete thanks to its high resistance to aggressive waters.

MSDS  DATA SHEET 

 

MAXSEAL FOUNDATION can be applied with brush, MAXBRUSH type or tampico fiber brush to facilitate its penetration in pores and hollows. Apply a thick layer to form a continuous and even coating, do not extend as paint and apply it in only one direction. Second layer must be applied crosswise.

After material application, clean brushes with water for further use.

Mixing
Pour clear water in a bucket and add MAXSEAL FOUNDATION slowly obtaining a thick creamy paste.
Let it rest for 10-15 minutes.
Mix with a metallic rod and a mixing disk assembled on a drill at low speed approximately during one minute.
A 25 Kgs. MAXSEAL FOUNDATION bag requires 7-7.5 It. of water.

 

Application temperature
At summertime temperatures, wet the surface with abundant water .
If a fast drying is observed, water can be sprayed 2 hours after the product application.
In winter time do not apply at temperatures below 5º C or if lower temperatures are expected within the next 24 hours after the application.
It must not be applied on frozen or icy surfaces. Optimal working temperature is between 15 to 28º C.
Avoid application when rainfall is expected within the next 4-6 hours further to application.