MAXQUICK ROLL is a polymer modified mortar, supplied in powder form. Once mixed with water, produces a decorative coating that is easily placed in a single layer with good waterproofing performance.

 MSDS  DATA SHEET

MAXQUICK ROLL is a polymer modified mortar, supplied in powder form. Once mixed with water, produces a decorative coating that is easily placed in a single layer with good waterproofing performance.

Uses

• Protection against weathering and for waterproofing of concrete, cementitious renders, concrete blocks, natural stone and brick.
• Decorative protection of walls, partition walls and other vertical elements.
• Appropriate for interior and exterior applications.

Advantages

• Waterproof against rainwater and permeable to water vapour.
• Decorative. Applied using a brush or roller, an attractively textured coating can be obtained.
• Single component. Only requires water for preparing the mix.
• Applied in a single layer. Excellent coverage and savings in man-hours.
• Long lasting and low maintenance. Cleaned with water, with or without pressure.

Application
This product is not recommended to be used for positive or negative static water pressure please refer to the MAXSEAL range of products.
Preparation of the surface: The surface to be coated with MAXQUCK ROLL must be perfectly clean and free from grease, oils, fungus, paints or algae. Also the substrate must structurally sound. Areas or loose elements must be eliminated mechanically or by sandblasting. Before applying MAXQUICK ROLL, a final washing of the substrate will be done to eliminate dust and dirt and to dampen it, nonetheless in the moment of application no water should remain on the surface.