MAXPLUG is a fast setting , expanding hydraulic mortar - A quick-setting hydraulic waterproofing cement that instantly stops running water from cracks, holes or other openings in concrete and masonry.

Maxplug Quick Set hydraulic mortar

 MSDS   DATA SHEET

MAXPLUG is a quick-setting hydraulic cement that instantly stops running water from cracks, holes or other openings in concrete and masonry, once it sets. It does not contract and sets within three to five minutes depending on the temperature. It only requires water for mixing.

Uses

• To seal leaks instantly in concrete surfaces and solid masonry.
• For emergency repairs on water pipes. For broken pipes, sometimes MAXPLUG will even work when the pipes are under pressure.
• Emergency plugging of gas leaks.
• To anchor bolts and other accessories that require immediate use.
• In basements, tunnels and sewers, to stop water under pressure.

Advantages

• The coating allows the base to transpire and thereby eliminates water vapour.
• Stops leaks and waterproofs the surface to which it is applied.
• Does not contract, or become weak due to its exothermic reactions.
• It increases in volume. Its rapid set, three to five minutes, may be controlled (either speed up or slowed down) by adding warm or cold water. The setting may even be instantaneous.
• It is the proper maintenance material for homes and industry.
• It is not toxic when it comes into contact with drinking water.
• Its mechanical properties are comparable to those of concrete, and in some cases even superior.
• It sets under water.

Applications

? To seal leaks instantly in concrete surfaces and solid masonry.
? For emergency repairs on water pipes. For broken pipes, MAXPLUG will even work when the pipes are under pressure.
? Emergency plugging of gas leaks
? To anchor bolts and other accessories that require immediate use.
? In basements, tunnels and sewers, to stop water under pressure.

Tools
MAXPLUG can be applied with a trowel, a spatula or even by hand. As any abrasive material, make sure to use protective rubber gloves when applying by hand.

How to mix
Mix only the amounts of MAXPLUG that can be applied in three minutes; if it is a water leak, mix only the amount of material that can be used with your hand. Use a plastic or rubber container, fill with MAXPLUG as needed, and add water slowly until it has the consistency of cement mortar.
One kilogram of MAXPLUG requires 280 cc of water.