| Reg. Price: | $230.35
|
| Sale Price: | $219.39
|
| Save: | $10.96 |
 |
|
|
MAXPATCH - TWO COMPONENT MORTAR FOR RESTORATION OF INDUSTRIAL CONCRETE PAVING IN MINIMUM THICKNESS
Description
The product is made up of two components: a cement base with special aggregate and a liquid resin. These are mixed together to form an advanced mortar for repairs to floors, ramps, steps etc... It has strong adhesion, is resistant to abrasions and is non slip.
MSDS Data Sheet
Details:
Description
The product is made up of two components: a cement base with special aggregate and a liquid resin. These are mixed together to form an advanced mortar for repairs to floors, ramps, steps etc... It has strong adhesion, is resistant to abrasions and is non slip.
Uses
- For restoration of industrial roads.
- To patch eroded concrete floors or to raise height.
- For non-slip ramp constructions, it is resistant to traffic wear.
- To repair concrete steps and stairs.
Advantages
• Non slip.
• From 5 mm. to 25 mm., thickness increase can be made.
• Can be used for filling voids or holes in floors.
• Quick setting: within 24-48 hours.
• Can be painted when dry or coloured by the addition of dye during mixing.
• Highly resistant to industrial acids and other pollutants.
Application instructions
• Clean off loose concrete.
• Clean the surface with a brush.
• Pour the MAXCRYL into a container.
• Add the MAXPATCH and mix to a creamy consistency
• Prime the treatment area with a brush
• Apply MAXPATCH with a steel trowel.
• Use the trowel for levelling
Preparation of the surface
. Remove all disintegrated concrete so that only solid structure remains. Box in patches or isolated areas to limit their perimeter. Cover expansion joints with at least 3 cm in thickness.
Use water under pressure to clean the concrete. Use a hydrochloric acid/water solution for oils by saturating the surface with the solution for 15 minutes and then cleaning with water under pressure. Repeat the process if the oil does not come off the first time.
